« Terug

EONSTOR S16F-R1430 / S16F-G1430

The S16F-R/G1430 combines extensive Fibre Channel connectivity with the latest SAS-interface disk drives. With a compatible interface, both the high-performance SAS and cost-effective SATA-II disk drives can apply in the same array. With the SAS multi-lane expansion ports, arrays can be expanded with up to 64 more HDD.

  • Dual-active or single controller
  • 4G FC to SAS or SATA-II (3Gbps) disk drives
  • Eight (8 - R1430) or four (4-G1430) 4G FC host ports
  • Hardware RAID5 and RAID6 engine by dedicated ASIC400 chipsets
  • EonPath™ multipathing sotware
  • SANWatch® storage management software

Specifications

RAID Controller

  • Hardware RAID parity computing
  • Hardware RAID5 & RAID6 parity computation
  • Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
  • RAID Migration
  • Configurable stripe size and write policy per array
  • Multiple Global, Dedicated, & Enclosure-specific hot-spares
  • Intelligent Drive Handling:
    - In degraded mode: skips irreparable blocks to continue rebuild
    - In normal operation: data-block verification and repair

Host Interface

  • Eight (8-R1430) or four (4-G1430) 4G FC
  • 4Gb/s via short-/long-wavelength LC-type SFP
  • Concurrent I/O commands
  • Tagged command queuing up to 1024 Max
  • command queue up to 1024
  • Fault-tolerant host links via onboard bypass

Drive Interface

  • Sixteen (16) 3.0Gbps SAS, hot-swappable drive trays
  • Accommodates 1-inch pitch, 3.5-inch SAS or SATA-II (3Gbps) disk drives
  • Automatic bad-sector reassignment
  • Dedicated bandwidth to each connected drive
  • MUX kits with port selectors for dual-controller access to SATA drives

System Components

  • Heavy duty 3U enclosure
  • Dual- (R1430) or Single (G1430) RAID and I/O management controller module
  • Fault-tolerant modules interfaced through a common backplane
  • High availability SAS domains to hard drives via expanders and port selectors
  • One (1) 512MB DDR DIMM module (default, supports up to 2GB in size)
  • Redundant, hot-swappable 530W power supply units
  • Redundant, dual-speed cooling modules
  • Sixteen (16), hot-swappable drive trays
  • Two (2) forearm handles
  • Li-Ion, life expectancy-aware battery backup unit (BBU)

Management

  • COM1 serial port for local access to firmware-embedded utility
  • COM2 for UPS connection
  • GUI, Telnet, and SSH system monitoring via Ethernet
  • Java-based SANWatch software with snapshot protection
  • Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  • Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  • LCD keypad panel to all configuration options
  • Event log in reserved space; Administrator's activity log
  • Variable logical drive options per DIMM size
  • Module status LED indicators:
    - Two (2) per drive tray
    - Seven (7) per controller module
    - One (1) per power supply unit
    - One (1) per BBU module
    - Two (2) per cooling module
    - Presence detect & thermal sensors via I2C bus

Physical/Electrical
Interfaces

  • Four (4) SFP host ports for 4Gb/s DAS or SAN connections
  • One (1) Fast Ethernet management port
  • Two (2) serial COM port (38400, n, 8, 1)

Power Supply Module
Redundant hot-swappable power supplies with PFC